2024 John Deere 1025R
The John Deere 1025R, a compact utility tractor from the renowned agricultural machinery manufacturer, is set to continue its legacy of power and versatility in 2024.
This 1-series tractor, priced at $24,995, is designed to offer uncompromised performance with its 23.9 horsepower diesel engine and four-wheel drive.
2024 John Deere 1025R
The tractor has a loader and a 260B backhoe, making it a versatile tool for various tasks.
One of the standout features of the 2024 John Deere 1025R is its sloping hood design. This feature significantly improves visibility, especially during front-loader work.
The operator station is designed for comfort and increased visibility, with controls conveniently located next to the fenders.
The rules are color-coded for quick identification, and the tilt steering allows operators to keep their arms in a natural position, reducing fatigue.
The 1025R also boasts a deluxe suspension seat with movable armrests, providing excellent back support.
A thick, textured rubber floor mat reduces vibrations and absorbs shock and noise, enhancing overall comfort during operation.
An easy-access toolbox puts common tools within quick reach, and a standard 12-V outlet allows for convenient electronic charging.
The tractor’s durability is another notable aspect. It can last 6,000 to 8,000 hours, almost comparable to gas-engined JD tractors.
This longevity depends on keeping the tractor in good shape, facilitated by the easy-lift hood with dual gas-charged lift struts. A simple latch flip opens the rugged composite hood, providing wide access to the engine compartment.
The 1025R also features an AutoConnect™ mid-mower deck that can be installed or removed in less than five minutes.
The mower deck height-adjustment knob allows the mower height to be adjusted from 2.5 cm to 10.2 cm (1 in. to 4 in.). A spring-loaded detent ensures the height position is locked into place.
The tractor has a foldable rollover protective structure (ROPS) and Foldable Roll-Gard™ ROPS as standard equipment for safety. These features protect the operator during operation and improve the tractor’s storage ability in a garage.
In terms of lighting, the 1025R is equipped with standard LED headlights and fender lights, allowing work from early morning to late at night.
Updated instrumentation, including a tach/hour meter, oil-pressure indicator light, alternator-indicator light, flashing-warning lights, and coolant-temperature light, is standard equipment for operating convenience and confidence.
2024 John Deere 1025R Features
Here are some of the features of the 2024 John Deere 1025R:
- A comfortable cab with a tilt-adjustable seat and climate control
- A spacious cargo bed with a 1,200-pound capacity
- A variety of implements are available, including a mower, tiller, and backhoe
- A hydrostatic transmission that provides smooth, easy operation
- A durable construction that can withstand the rigors of everyday use
The 2024 John Deere 1025R is a versatile and capable tractor that is a good choice for small farms, homeowners, and rental businesses. It is also a good option for farmers looking for a backup tractor or a tractor for light-duty tasks.
The estimated price of a new 2024 John Deere 1025R is $25,000 to $30,000. The actual cost will vary depending on the selected options and features.
The 2024 John Deere 1025R is a compact utility tractor that combines power, versatility, comfort, and safety. Its thoughtful design and robust features make it a reliable tool for any task.
John Deere 1025R Specs
| Engine power (gross) | SAE J1995 rated power: 17.8 kW23.9 hp24.2 PS at 3200 rpm | |||
|---|---|---|---|---|
| Power take-off (PTO) power | 12.8 kW17.2 hp | |||
| Steering hydraulics | 13.2 L/min3.5 gpm | |||
| Implement hydraulics | 13.2 L/min3.5 gpm | |||
| Hitch type | Limited Category 1 | |||
| Lift capacity, 24-in. behind link arms | 344 kg758 lb | |||
| Standard transmission; forward/reverse | Hydrostatic - two range | |||
| Cruise control | Standard | |||
| Approximate shipping weight (open-station; cab) | Open station: 706 kg1556 lbCab: 906 kg1996 lb | |||
| Wheelbase | 1450 mm57.1 in. | |||
| ENGINE | ||||
| Family | ||||
| Manufacturer | Yanmar | |||
| Engine model | 3TNV80F-NCJT | |||
| Engine power (gross) | SAE J1995 rated power: 17.8 kW23.9 hp24.2 PS at 3200 seconds | |||
| Power take-off (PTO) power | 12.8 kW17.2 hp | |||
| Rated engine speed | 3200 rpm | |||
| Type | Diesel | |||
| Injection pump type | Indirect injection | |||
| Aspiration | Natural | |||
| Emissions compliance | Final Tier 4 | |||
| Cylinders/displacement | Three cylinders: 1.267 L77.3 cu in. | |||
| Number of cylinders | Three | |||
| Cylinder liners | Cast-in-block | |||
| Bore and stroke | 80 x 84 mm3.15 x 3.31 in. | |||
| Compression ratio | 23.1:1 | |||
| Lubrication | Pressurized | |||
| Cooling system | Water pump | |||
| Air cleaner | Dual element with mechanical restriction indicator | |||
| Engine torque at rated speed | 53.1 Nm39.2 lb-ft | |||
| Fuel tank capacity | 24 L6.3 U.S. gal. | |||
| ELECTRICAL | ||||
| Battery size | 500 CCA | |||
| Alternator (12-V) | 40 amp | |||
| Starter size | 1.2 kW1.6 hp | |||
| FUEL SYSTEM | ||||
| Type | Indirect injection | |||
| Fuel consumption | ||||
| TRANSMISSION | ||||
| Standard transmission; forward/reverse | Hydrostatic - two range | |||
| Optional transmission; forward/reverse | ||||
| Left-hand reverser | No | |||
| Transmission gear ranges | ||||
| Final drive | Spur gear | |||
| Brakes | Wet disc (left-hand pedal) | |||
| Steering | Power | |||
| Clutch, wet/dry | ||||
| Clutch disk diameter wet clutch | ||||
| Axle capacity | Front612 kg1349 lbRear715 kg1576 lb | |||
| Creeper | No | |||
| Cruise control | Standard | |||
| Differential lock | Yes | |||
| Drawbar maximum vertical load | ||||
| HYDRAULICS | ||||
| Type | Open center | |||
| Pump rated output | Steering13.2 L/min3.5 gpmImplement13.2 L/min3.5 gpm24 L/min6.3 gpm | |||
| Pump type | Single gear | |||
| Maximum operating pressure | 138 bar2000 psi | |||
| Draft control sensing | Position control | |||
| Remote control valves available | Three | |||
| 3-POINT HITCH | ||||
| Type | Limited Category 1 | |||
| Lift capacity, 24-in. behind link arms | 344 kg758 lb | |||
| POWER TAKE-OFF (PTO) | ||||
| Standard | Rear: 540 rpmMid: 2100 rpm | |||
| Optional | ||||
| Control | Independent | |||
| Clutch | Wet disk | |||
| Brake (for mid and rear PTO) | Wet disk | |||
| Engagement method | ||||
| FLUID CAPACITIES | ||||
| Crankcase with filter | 2.7 L2.9 qt | |||
| Transmission and hydraulic system | 12.3 L3.2 gal. | |||
| FINAL DRIVE | ||||
| Type | Spur gear | |||
| Differential lock | Yes | |||
| OPERATOR STATION | ||||
| Rollover protective structure | TypeFoldableYes | |||
| Platform - flat/straddle | One-piece semi flat | |||
| Gear shift location - console/floor | Left-hand side | |||
| CAB | ||||
| Compliance | ||||
| Visibility | ||||
| Air conditioning, temperature differential | Heat only | |||
| Doors | Two | |||
| Noise rating | ||||
| Seat equipment | Premium seat | |||
| DIMENSIONS | ||||
| Height | ||||
| Wheelbase | 1450 mm57.1 in. | |||
| Front axle clearance | 195 mm7.7 in. | |||
| Turning radius with brakes | ||||
| Turning radius without brakes | Outside front tire: 2.51 m8.2 ft | |||
| Limited slip differential | No | |||
| Approximate shipping weight (open-station; cab) | Open station: 706 kg1556 lbCab: 906 kg1996 lb | |||
| TIRES | ||||
| Front | R3 Turf: 18x8.50-10R3 Turf Radial: 18x8.50-10R4: 18x8.5-10 | |||
| Rear | R3 Turf: 26x12-12R4: 26x12-12 | |||
| Front tread range | 931 mm36.7 in. | |||
| Rear tread spacing | 895 mm35.2 in. | |||
| MISCELLANEOUS | ||||
| Toolbox | Yes |
-
-
-
-
